|
|
If you can't find what you require in our standard range on the website, kindly use the Enquiry Form to send us your wishes for custom manufacturing. |
|
Electrical holding magnetsFor this DC holding magnet system, the magnetic holding effect only occurs on power up. The operating voltage is 24 V =. The switch-on duration can be 100%. The holding discs are supplied with free wire ends, the magnetic holding rails with two open connection screws. Depending on the application, it is necessary to observe accident prevention regulations.
|
|
For the following magnetic holding rails the holding area can be reduced by 2.5 mm in order to carry out necessary reworking. |
|
For circular holding magnets the holding surface can be reduced by the measure "I". The diameter of the middle hole corresponds to the size of the reverse inner thread. |
|
|
|
|---|
| Type | Holding surface
Ø a (- 0,1) | Holding force* | b | Ø c | Ø d | f | g | i | Input
power | Weight | Minimum
thickness |
|---|
| N | kp |
|---|
| EM1 | 18,0 | 40,0 | 4,0 | 11,0 | 8,0 | 16,1 | M3 | 5,0 | 1,0 | 1,4 W | 17,0 g | 2,0 mm |
| EM2 | 25,0 | 140,0 | 14,0 | 20,0 | 11,1 | 22,3 | M4 | 6,0 | 1,0 | 3,2 W | 60,0 g | 3,0 mm |
| EM3 | 32,0 | 230,0 | 23,0 | 22,0 | 14,3 | 28,6 | M4 | 6,0 | 3,0 | 3,6 W | 110,0 g | 3,6 mm |
| EM5 | 50,0 | 700,0 | 70,0 | 27,0 | 22,4 | 44,7 | M5 | 8,0 | 3,0 | 6,5 W | 300,0 g | 6,0 mm |
| EM8 | 80,0 | 1800,0 | 180,0 | 38,0 | 34,0 | 72,8 | M8 | 12,0 | 3,0 | 15,0 W | 1100,0 g | 9,0 mm |
| EM15 | 150,0 | 9000,0 | 900,0 | 56,0 | 67,9 | 134,0 | M16 | 24,0 | 3,0 | 37,0 W | 6400,0 g | 17,0 mm |
All dimensions in mm. |
|
|
 Order list
Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price) |
Catalogue
page |
Type |
1 - 19 |
20 - 49 |
50 - 99 |
100 - 199 |
200 - 499 |
500 - 1000 |
|
| 35 |
EM1 |
20,50 |
18,30 |
A |
A |
A |
A |
|
| 35 |
EM2 |
22,80 |
19,50 |
A |
A |
A |
A |
|
| 35 |
EM3 |
29,00 |
26,50 |
A |
A |
A |
A |
|
| 35 |
EM5 |
33,90 |
31,70 |
A |
A |
A |
A |
|
| 35 |
EM8 |
76,00 |
74,50 |
A |
A |
A |
A |
|
| 35 |
EM15 |
245,00 |
A |
A |
A |
A |
A |
|
Small orders: Payments from foreign countries result in additional bank charges, therefore we charge an additional lump sum of 15,- Euro for all foreign orders with a goods value less than 153,- Euro.
Please ask for our Conditions of sale, delivery and payment in english and our export conditions for your country. |
|
|
Magnet holding rails
|
|
|---|
| Type | Holding surface
a x b | Holding force* | c | d | e | f | g | h | i | k | l | Input
power | Weight | Minimum
thickness |
|---|
| N | kp |
|---|
| El1 | 100,0 x 32,0 | 880,0 | 88,0 | 31,0 | 20,0 | 50,0 | 2 x | M6 | 10,0 | 13,5 | 68,0 | 10,0 | 7 W | 650,0 g | 8,0 mm |
| El3 | 200,0 x 32,0 | 2100,0 | 210,0 | 31,0 | 20,0 | 50,0 | 4 x | M6 | 10,0 | 13,5 | 168,0 | 10,0 | 14 W | 1250,0 g | 8,0 mm |
| El5 | 500,0 x 32,0 | 6000,0 | 600,0 | 31,0 | 20,0 | 50,0 | 10 x | M6 | 10,0 | 13,5 | 468,0 | 10,0 | 35 W | 3150,0 g | 8,0 mm |
| El7 | 150,0 x 60,0 | 2600,0 | 260,0 | 49,0 | 30,0 | 75,0 | 2 x | M8 | 12,0 | 15,0 | 93,5 | 12,0 | 22 W | 2350,0 g | 10,0 mm |
| El8 | 200,0 x 60,0 | 3750,0 | 375,0 | 49,0 | 35,0 | 120,0 | 2 x | M8 | 12,0 | 15,0 | 144,0 | 12,0 | 31 W | 3200,0 g | 10,0 mm |
|
All dimensions in mm.
* The holding forces depend on the minimum thickness of the magnet layer for mild steel (St 37), a 100 % contact of the magnet holding surface area and zero air gap on an even surface with vertical pulling force at a warm operating temperature (at 90 % working voltage). We can provide information on request about the decrease of holding force when working with an air gap or thinner magnet layer. The magnets with a bigger distance between the poles (i.e. type EL7, EL8) are suitable for holding parts with unclean, rough surfaces. |
|
|
Order list
Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price) |
Catalogue
page |
Type |
1 - 19 |
20 - 49 |
50 - 99 |
100 - 199 |
200 - 499 |
500 - 1000 |
|
| 35 |
EL1 |
115,00 |
A |
A |
A |
A |
A |
|
| 35 |
EL3 |
182,00 |
A |
A |
A |
A |
A |
|
| 35 |
EL5 |
245,00 |
A |
A |
A |
A |
A |
|
| 35 |
EL7 |
260,00 |
A |
A |
A |
A |
A |
|
| 35 |
EL8 |
285,00 |
A |
A |
A |
A |
A |
|
Small orders: Payments from foreign countries result in additional bank charges, therefore we charge an additional lump sum of 15,- Euro for all foreign orders with a goods value less than 153,- Euro.
Please ask for our Conditions of sale, delivery and payment in english and our export conditions for your country. |
|
|
|
|
|
|
|
|
|
|
Index 
Order list 
Holding magnets with...
Speading megnets for steel...
